Author - admin

1
Autonomous System (AS)
2
Why we use Trunk Port
3
How many VLAN Create on Router
4
Private IP Classes Range

Autonomous System (AS)

1. What is an Autonomous System?

An Autonomous System (AS) is a group of IP networks operated by one or more network operator/s which has a single and clearly defined external routing policy. Exterior routing protocols are used to exchange routing information between Autonomous Systems.

2.When should an Autonomous System be created?

An AS needs to be created if a network connects to more than one AS with different routing policies. Some common examples of Autonomous Systems are networks connected to two or more upstream service providers or exchange points, networks peering locally at exchange points.

3.What is an Autonomous System Number?

A public AS has a globally unique number, an Autonomous System number (ASN), associated with it; this number is used in both the exchange of exterior routing information (between neighboring Autonomous Systems), and as an identifier of the AS itself.

There are two types of Autonomous System numbers; Public AS numbers and Private AS numbers.

4.When is a Public Autonomous System number required?

A Public AS number is required only when an AS is exchanging routing information with other Autonomous Systems on the public Internet. That is, all routes originating from an AS is visible on the Internet.

5. Am I eligible for a Public Autonomous System Number?

An organisation is eligible for an ASN assignment if it:

  • is multihomed (this includes organisations connected to a public Internet Exchange Point); and
  • has a single, clearly defined routing policy that is different from its providers’ routing policies.

An organisation will also be eligible if it can demonstrate that it will meet the above criteria upon receiving an ASN (or within a reasonably short time thereafter).

6. When can I use a Private Autonomous System number?

A Private AS number should be used if an AS is only required to communicate via BGP with a single provider. As the routing policy between the AS and the provider will not be visible in the Internet, a Private AS Number can be used for this purpose.

The IANA has reserved AS64512 through to AS65535 to be used as private ASNs.

7. I plan to change my upstream providers – can I take my ASN with me?

This depends on how you received that ASN. If you got it directly from APNIC or an NIR, then it is portable and you can take it with you to whichever providers you choose (subject to the agreement you signed with APNIC or the NIR).

However if got your ASN from an LIR, you can only use it while you continue to receive connectivity from the LIR. In other words, if you decide to no longer use that LIR as one of your upstream providers, then you will have to return the ASN.

Back

Why we use Trunk Port

Question : We can connect two switches via Ethernet cable why we use trunk port between switches ?

Ans:

Trunk links are required to pass VLAN information between switches. A port on a Cisco switch is either an access port or a trunk port. Access ports belong to a single VLAN and do not provide any identifying marks on the frames that are passed between switches. Access ports also carry traffic that comes from only the VLAN assigned to the port. A trunk port is by default a member of all the VLANs that exist on the switch and carry traffic for all those VLANs between the switches. To distinguish between the traffic flows, a trunk port must mark the frames with special tags as they pass between the switches. Trunking is a function that must be enabled on both sides of a link. If two switches are connected together, for example, both switch ports must be configured for trunking, and they must both be configured with the same tagging mechanism (ISL or 802.1Q).

Back

How many VLAN Create on Router

Ans : Vlan create on Switches not router :p

All the following information is taken from the data sheets for these devices, on the Cisco website.

  • The Cisco Catalyst 3550 switches support up to 1,005 VLANs.
  • The Cisco Cataylst 3750 switches support up to 1,005 VLANs per stack.

Both support up to 4000 VLAN IDs, but only 1,005 VLANs configured on these (some VLAN IDs will come from other switches). Unless you are a service provider, you will never configure anything like these numbers.

Please also note that the 3550 is now end-of-life, you should look at the 3560 switches instead.

 

Back

Private IP Classes Range

  • Public IP addresses are addresses that are valid as nodes on the Internet.
  • They can be resolved and routed across the Internet from one point to another.
  • Unlike public IP, private IP addresses are not valid on the Internet.

Three range of private IP addresses has been selected for the three network class.

For Class A network, 10.0.0.0 – 10.255.255.255 (10/8 prefix) range (For big network that requires a huge pool of 16 million private IP addresses)

For Class B network, 172.16.0.0 – 172.31.255.255 (172.16/12 prefix) range (For medium-sized network that requires 65000 private IP addresses)

For Class C network, 192.168.0.0 – 192.168.255.255 (192.168/16 prefix) range (Commonly used IP range on smaller network for easier addressing of 254 IP addresses. May not necessarily be smaller network but network managed in smaller blocks.)

private ip classes range

Beside these, there is Microsoft’s 169.254.0.0 range of default IP addresses that are allocated to systems when they are unable to obtain address from a DHCP server. Its Called APIPA

When a DHCP server fails, APIPA allocates IP addresses in the private range 169.254.0.1 to 169.254.255.254.

Back

Copyright © 2025. Created by Easy Learning. Powered by DownloadNaats | Terms of Use | Privacy Policy.